साचा:Convert/doc

Template {{convert}} calculates measurements from one unit (you can enter) to another one, and then presents the results. For example:

{{convert|2|km|mi}} → २ किलोमीटर (१.२ मैल)

{{convert|7|mi|km}} → ७ मैल (११ किमी)

The available units are listed below. Units are case-sensitive always (kW, not KW and not kw). Multiple formatting and calculation options are listed below.

See Help:Convert for more complete information

For currency conversion into US dollars, see Template:To USD

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first value shows unit name spelled out, the second the symbol (or abbreviation). Use |abbr=on/off to change this behaviour:

• {{convert|1|lb|kg}} → १ पौंड (०.४५ किलो)

To abbreviate both:

• {{convert|1|lb|kg|abbr=on}} → १ पौंड (०.४५ किलो)
• {{convert|1|lb|kg|abbr=off}} → १ पौंड (०.४५ किलोग्रॅम)

|abbr=in is the reverse behaviour to the default, |abbr=out:

• {{convert|1|lb|kg|abbr=in}} → १ पौंड (०.४५ किलोग्रॅम)

Convenience: {{cvt}} has |abbr=on by default

Template {{cvt}} is similar to {{convert}}, but has |abbr=on as the default behaviour. In {{cvt}}, all other options are available. So:

{{cvt|1|lb|kg}} → साचा:Cvt

is equal to:

{{convert|1|lb|kg|abbr=on}} → साचा:Cvt

Adjective: a 10-mile distance

Use |adj=on to produce the adjective form:

• A {{convert|10|mi|km|adj=on}} distance → A १०-मैल (१६ किमी) distance.

Default behaviour, for comparison:

• {{convert|10|mi|km}} to go → १० मैल (१६ किमी) to go.

This option does not work with |abbr=on.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

By definition, 100 ft equals ३०.४८ मी. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).

Examples of rounding
Input	Displays as	Note
{{convert|123|ft|m|-1}}	१२३ फूट (४० मी)
{{convert|123|ft|m|0}}	१२३ फूट (३७ मी)
{{convert|123|ft|m|1}}	१२३ फूट (३७.५ मी)
{{convert|550|ft|m|0}}	५५० फूट (१६८ मी)	Approximate value is 167.64 m
{{convert|550|ft|m}}	५५० फूट (१७० मी)	Rounds to 170, when approximate value is 167.64 m
{{convert|500|ft|m|0}}	५०० फूट (१५२ मी)	Approximate value is 152.4 m
{{convert|500|ft|m}}	५०० फूट (१५० मी)	Rounds to 150, when approximate value is 152.4 m

Convert supports four types of rounding:

Round to a given precision: use a precision number

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of ¹⁄₁₀ to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• {{convert|1200|ft|m|sigfig=4}} → १,२०० फूट (३६५.८ मी)
• {{convert|1200|ft|m|sigfig=3}} → १,२०० फूट (३६६ मी)
• {{convert|1200|ft|m|sigfig=2}} → १,२०० फूट (३७० मी)
• {{convert|1200|ft|m|sigfig=1}} → १,२०० फूट (४०० मी)

Default behaviour, for comparison:

• {{convert|1200|ft|m}} → १,२०० फूट (३७० मी)

Setting |sigfig= is meaningless

• {{convert|1200|ft|m|sigfig=0}} → रुपांतरण त्रूटी: Parameter sigfig "0" must be a positive integer

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

• {{convert|10|m|ft}} → १० मीटर (३३ फूट)
• {{convert|10|m|ft|round=5}} → १० मीटर (३३ फूट)

Similar: using |round=25 rounds the outcome to a multiple of 25.

• {{convert|10|m|ft}} → १० मीटर (३३ फूट)
• {{convert|10|m|ft|round=25}} → १० मीटर (३३ फूट)

Default behaviour, for comparison:

• {{convert|10|m|ft|sigfig=4}} → १० मीटर (३२.८१ फूट)

In a range, one can round each value individually to the default. Use |round=each:

• {{convert|10 x 200 x 3000|m|ft}} → रुपांतरण त्रूटी: मूल्य "10 x 200 x 3000" अंकातच आवश्यक आहे
• {{convert|10 x 200 x 3000|m|ft|round=each}} → रुपांतरण त्रूटी: मूल्य "10 x 200 x 3000" अंकातच आवश्यक आहे

Round to a multiple of a given fraction: 2+³⁄₁₆ inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in ¹⁄₃).

• {{convert|5.56|cm|in|frac=16}} → ५.५६ सेंटीमीटर (२.१९ इंच)
• {{convert|8|cm|in|frac=4}} → ८ सेंटीमीटर (३.१ इंच)

The fraction is reduced when possible:

• {{convert|8|cm|in|frac=100}} → ८ सेंटीमीटर (३.१ इंच)

Default behaviour, for comparison:

• {{convert|8|cm|in}} → ८ सेंटीमीटर (३.१५० इंच)

In temperatures: rounding °C, °F and K

In temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

1. {{convert|10,000|C|F K}} → १०,००० °से (१८,००० °फॅ; १०,३०० के)
2. {{convert|10,000.1|C|F K}} → १०,०००.१ °से (१८,०३२.२ °फॅ; १०,२७३.२ के)
3. {{convert|-272|C|F K}} → −२७२ °से (−४५७.६० °फॅ; १.१५ के)
4. {{convert|-272|C}} → −२७२ °से (−४५७.६० °फॅ)
5. {{convert|-300|C|F K}} → −३०० °से (−५०८.० °फॅ; −२६.९ के)
6. {{convert|0|C|F K}} → ० °से (३२ °फॅ; २७३ के)

The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a ०.१ degrees Celsius change is a ०.१८ degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert|10000|C|sigfig=5}} → १०,००० °से (१८,०३२ °फॅ)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert|10000|C|0}} → १०,००० °से (१८,०३२ °फॅ)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into into five significant output digits because of the two numbers after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.

Into multiple units: १० °से (५० °फॅ; २८३ के)

Separate the multiple output units by a space:

• {{convert|10|C|F K}} → १० °से (५० °फॅ; २८३ के)
• {{convert|5|km|mi nmi}} → ५ किलोमीटर (३.१ मैल; २.७ nmi)

If the output unit names contain spaces, use + as the separator.

See also:

• For multiple-unit options like 1 ft 5 in, see #In input and #In output.

Ranges of values

For a conversion of a difference, see § Units of difference.

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:
साचा:Convert/doc/range separator list

Multiple dimensions: ६ मी × १२ मी (२० फूट × ३९ फूट)

Use by:

• {{convert|6|by|12|ft|m}} → ६ by १२ फूट (१.८ by ३.७ मी)

Use ×, multiplication sign, or x, letter:

• {{convert|6|x|12|m|ft}} → ६ by १२ मीटर (२० फूट × ३९ फूट)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

• {{convert|6|x|12|m|ft|abbr=on}} → ६ मी × १२ मी (२० फूट × ३९ फूट)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{convert|1|ft|3|in|x|3|ft|5|in|mm}} → रुपांतरण त्रूटी: "x" एकक अनोळखी आहे

Default behaviour, for comparison:

• {{convert|1|ft|3|in|mm}} → १ फूट ३ इंच (३८० मिमी)

Words

Spelling of unit name: UK metre or US meter?

Default spelling of units is en-UK. To show en-US spelling, use |sp=us:

{{convert|1|m|ft}} → १ मीटर (३.३ फूट)—default

{{convert|1|m|ft|sp=us}} → १ मीटर (३.३ फूट)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

• {{convert|10|mi|m|spell=in}} → १० मैल (१६,००० मी)

To spell out both in and out values, use |spell=on:

• {{convert|10|mi|m|spell=on}} → १० मैल (१६,००० मी)

To make first letter a capital, use |spell=In, |spell=On

• {{convert|10|mi|m|spell=In}} → १० मैल (१६,००० मी)
• {{convert|10|mi|m|spell=On}} → १० मैल (१६,००० मी)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

• {{convert|10|mi|m|spell=on|abbr=off|sp=us}} → १० मैल (१६,००० मीटर)

Inserted before units: 4 planted acres

• {{convert|4|acre||adj=pre|planted}} → ४ planted एकर (१.६ ha)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

• {{convert|4|acre||disp=preunit|planted }} → ४ planted एकर (१.६ planted ha)
• {{convert|4|acre||disp=preunit|planted |reforested-}} → ४ planted एकर (१.६ reforested-ha)

After adjective unit: A १०-फूट-long corridor

{{convert|10|ft|m|adj=mid|-long}} → १०-फूट-long (३.० मी)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{convert|1|metre}} → रुपांतरण त्रूटी: Use m (not metre)
• {{convert|2|metre}} → रुपांतरण त्रूटी: Use m (not metre)
• {{convert|2|metre|abbr=on}} → रुपांतरण त्रूटी: Use m (not metre)

Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

• {{convert|100|foot|abbr=off}} → १०० फूट (३० मीटर)

Numbers

Using an SI prefix: gigameter (Gm), or micrometer (μm)

साचा:Sidebar metric prefixes (small) Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigameter. These are plain multiplication factors.

To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:

• १२ गिमी (१.२×१०^१० मी)
• १२ μमी (१.२×१०^−५ मी)

The prefix can be added before the SI unit (here: unit m for meter):

• {{convert|12|Gm|mi|abbr=on}} → १२ गिमी (७५,००,००० मैल)
• Mm: १२ मेमी (७,५०० मैल)
• km: १२ किमी (३९,००० फूट)
• mm: १२ मिमी (०.४७ इंच)
• μm: १२ μमी (०.०१२ मिमी)
• um: १२ uमी (०.०१२ मिमी) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{convert|12000|mi|Mm|abbr=on}} → १२,००० मैल (१९ मेमी)
• {{convert|12|in|μm|abbr=on}} → १२ इंच (३,००,००० μमी)

As an exception, the non-SI unit "inch" can have the "μ" prefix too)

• {{convert|12|μm|μin|abbr=on}} → १२ μमी (४७० µin)

Further information: Help:Convert units § SI prefixes

Engineering notation: 7 × 10⁶ m

In the unit: e6m

Engineering number notations like 7E6 (for 7 × 10⁶) can be entered as a "prefix" to the unit:

• {{convert|7|e6m}} → ७ दशलक्ष मीटर (२,३०,००,००० फूट)

The same is possible for the output unit:

• {{convert|23,000,000|ft|e6m}} → २,३०,००,००० फूट (७.०×१०^^६ मी)

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

• e3 (thousand),
• e6 (million),
• e9 (billion),
• e12 (trillion),
• e15 (quadrillion).

Scientific notation: 1.23×10⁻¹⁴

In scientific notation, a number is written like १.२३×१०^−१४. The plain number has exactly one digit before the decimal point.

With {{convert}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{convert|12.3e-15|atm|atm|abbr=on}} → १२.३e-१५ atm (१.२३×१०^−१४ atm)
• {{convert|0.00000005|atm|atm|abbr=on}} → ०.०००००००५ atm (५.०×१०^−८ atm)

Input with fractions: १ ^१⁄_२ इंच (३८.१ मिमी)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

• {{convert|1/2|in|mm|1}} → १⁄२ इंच (१२.७ मिमी)
• {{convert|1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "1⁄2" अंकातच आवश्यक आहे

With integers, use a + sign

• {{convert|2+1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "2+1⁄2" अंकातच आवश्यक आहे

When negative, use a hyphen - and repeat it:

• {{convert|-2-1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "-2-1⁄2" अंकातच आवश्यक आहे
• {{convert|2-1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "2-1⁄2" अंकातच आवश्यक आहे Note: this is read as a range
• {{convert|-2+1⁄2|in|mm|1}} → रुपांतरण त्रूटी: मूल्य "-2+1⁄2" अंकातच आवश्यक आहे N Should be a number, not an expression (do not require a calculation)

Output with horizontal fraction bar in: 1/2 inch

Using a double slash (//) returns a horizontal bar fraction:

• {{convert|1//2|in|mm|1}} → १/२ इंच (१२.७ मिमी)
• {{convert|2+1//2|in|mm|1}} → २ १/२ इंच (६३.५ मिमी)

Thousands separator: 1,000 mi or 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

• {{convert|1234567|m|ft}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
• {{convert|1,234,567|m|ft}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
• {{convert|1 234 567|m|ft}} → रुपांतरण त्रूटी: मूल्य "1 234 567" अंकातच आवश्यक आहे N

Set |comma=off to remove the separator from the output:

• {{convert|1234567|m|ft|comma=off}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

• {{convert|1234567|m|ft|comma=gaps}} → १२३४५६७ मीटर (४०५०४१७ फूट)

Default behaviour, for comparison:

• {{convert|1234567|m|ft}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)

Setting |comma=5 or |comma=gaps5 will only add the separator when the number of digits is 5 or more:

• {{convert|1234|m|ft|comma=5}} → १२३४ मीटर (४०४९ फूट)
• {{convert|1234567|m|ft|comma=5}} → १२,३४,५६७ मीटर (४०,५०,४१७ फूट)
• {{convert|1234|m|ft|comma=gaps5}} → १२३४ मीटर (४०४९ फूट)
• {{convert|1234567|m|ft|comma=gaps5}} → १२३४५६७ मीटर (४०५०४१७ फूट)

Default behaviour, for comparison:

• {{convert|1234|m|ft}} → १,२३४ मीटर (४,०४९ फूट)

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, x|…:

• {{convert|10|m|ft|disp=sqbr}} → १० मीटर [३३ फूट]
• {{convert|10|m|ft|disp=comma}} → १० मीटर, ३३ फूट
• {{convert|10|m|ft|disp=or}} → १० मीटर or ३३ फूट

Default behaviour, for comparison:

• {{convert|10|m|ft}} → १० मीटर (३३ फूट)

Setting |disp=br will force a new line (<br/>)

• {{convert|10|m|ft|disp=br}} → १० मीटर
  ३३ फूट

Also |disp=br() will force a new line, and keep the brackets:

• {{convert|10|m|ft|disp=br()}} → १० मीटर (३३ फूट)

Setting |disp=x|… allows any text as separator:

• {{convert|10|m|ft|disp=x|_MyText_}} → १० मीटर_MyText_३३ फूट—(To display spaces, use  )

Flipping (reordering) the two measurements: १,६०९.३ मीटर (१ मैल)

Setting |order=flip will flip (swap) the two measurements:

• {{convert|1|mi|m|order=flip}} → १,६०९.३ मीटर (१ मैल)

Default behaviour, for comparison:

• {{convert|1|mi|m}} → १ मैल (१,६०९.३ मीटर)

When converting to multiple units, the effect is:

• {{convert|10|km|mi nmi|order=flip}} → ६.२१३७ मैल; ५.३९९६ nautical mile (१० किलोमीटर)
• {{convert|10|km|nmi mi|order=flip}} → ५.३९९६ nautical mile; ६.२१३७ मैल (१० किलोमीटर)

Displaying parts of the result: २ (१.५)

It is possible to display only parts of the conversion result:

रुपांतर करा	बहीर्दाय(आउटपुट)	वर्णन
{{convert|2|cuyd|m3}}	२ cubic yard (१.५ मी३)	अविचल वर्तन, ताडण्यासाठी
{{convert|2|cuyd|m3|abbr=values}}	२ (१.५)	अंतर्दाय व बहीर्दाय आकडे
{{convert|2|cuyd|m3|disp=unit}}	cubic yard	अंतर्दाय एकक
{{convert|2|cuyd|m3|disp=unit|adj=on}}	cubic-yard	अंतर्दाय एकक, adjective (hyphenated)
{{convert|2|cuyd|cuyd|0|disp=out|abbr=off}}	२ cubic yard	अंतर्दाय (workaround)
{{convert|2|cuyd|m3|abbr=~}}	२ cubic yard (cu yd, १.५ मी३)	Input: both name and symbol
{{convert|2|cuyd|m3|disp=unit2}}	मी३	बहीर्दाय एकक (symbol)
{{convert|2|cuyd|m3|disp=unit2|abbr=off}}	घन मीटर	बहीर्दाय unit (name)
{{convert|2|cuyd|m3|disp=number}}	१.५	बहीर्दाय किंमत
{{convert|2|cuyd|m3|disp=out}}	१.५ मी३	बहीर्दाय किंमत व एकक
{{convert|2|cuyd|m3|disp=out|abbr=off}}	१.५ घन मीटर	बहीर्दाय किंमत व एकक

Display both input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

• {{convert|2|kPa|psi|abbr=~}} → २ किलोpascal (किPa, ०.२९ psi)
• A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure → A २-किलोpascal (किPa, ०.२९ psi) pressure

Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()
१०० किलोमीटर ६२ मैल	१०० किलोमीटर (६२ मैल)

Table columns showing numbers only

Using {convert} in a table cell, with |disp=table splits the result over two columns:

{{convert|10|m|ft|disp=table}} → align="right"|१०

|align="right"|३३

|disp=tablecen does the same, and also centers the text:

{{convert|20|m|ft|disp=tablecen}} → align="center"|२०

|align="center"|६६

The units are added as a column header:

	m	ft
|disp=table	१०	३३
|disp=tablecen	२०	६६
|disp=<other> (default)	३० मीटर (९८ फूट)

Sorting

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert|10|m|ft|sortable=on}} → <span style="display:none">7001100000000000000</span>10 metres (33&nbsp;ft)

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	ft
A	7001157500000000000१५ ३⁄४	५२
B	7001155000000000000१५.५	५१
C	7001160000000000000१६.०	५२.५
D	7001160000000000000१६	५२

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Units

All units

See also: Convert/list of units

Units are case-sensitive: use kW, not KW or kw

{{Convert}}द्रारे सहाय्यीकृत एककांची छोटी यादी
स्पष्टीकरण
पद्धत	एकक	कोड (इंग्रजी) (पर्यायी)	लघुरूप	नोंदी	रुपांतरण	एकत्रिकरण
कोणत्या पद्धतीतील हे एकक आहे	नावानुसार एककांची यादी	हा साचा वापरतांना टाकावयाचे कोड	साच्याद्वारे दाखविण्यात येणारे लघुरूप	एककांसाठीच्या सर्वसाधारण नोंदी ज्या एककास किंवा त्यांचा या साच्यातील वापरास लागु पडतील	रुपांतरण गुणक जे , मुळ एस आय एककांपासून किंवा एककात रुपांतरण करण्यास साच्याद्वारे वापरल्या जातात	अनेक रुपांतरणे करण्यास आवश्यक कोड
लांबी (संपूर्ण यादी)
system	unit	unit- code		abbrev- iation	notes	sample default conversion	combination output units
SI	मेगामीटर	Mm		मेमी	US spelling: megameter	१.० मेमी (३२,८०,८३९ फूट ११ इंच)
	किलोमीटर	km		किमी	US spelling: kilometer	१.० किमी (०.६२ मैल)	km mi
	मीटर	m		मी	US spelling: meter	१.० मी (३ फूट ३ इंच)	m ft m ftin
	सेंटीमीटर	cm		सेंमी	US spelling: centimeter	१.० सेंमी (०.३९ इंच)	cm in
	मिलीमीटर	mm		मिमी	US spelling: millimeter	१.० मिमी (०.०३९ इंच)	mm in
	मायक्रोमीटर	µm (um)		µमी	US spelling: micrometer	१.० µमी (३.९×१०−५ इंच)
	नॅनोमीटर	nm		नॅमी	US spelling: nanometer	१.० नॅमी (३.९×१०−८ इंच)
non-SI metric	ångström	Å (angstrom)		Å		१.० Å (३.९×१०−९ इंच)
Imperial & US customary	मैल	mi		(none)		१.० मैल (१.६ किमी)	mi km
	furlong	furlong		(none)		१.० furlong (६६० फूट; २०० मी)
	chain	chain		(none)		१.० chain (६६ फूट; २० मी)
	rod	rd		rd	For other names of this unit see the full list.	१.० rd (१७ फूट; ५.० मी)
	fathom	fathom		(none)	fathom ≡ 6 ft	१.० fathom (६.० फूट; १.८ मी)
	यार्ड	yd		(none)	assumes the international definition	१.० यार्ड (०.९१ मी)
	फूट	ft (foot)		(none)	The foot code will produce foot as the plural form.	१.० फूट (०.३० मी)	ftin (feet and inches) ft m (foot m)
	इंच	in		(none)		१.० इंच (२५ मिमी)	in cm in mm
Other	nautical mile	nmi		nmi	the international standard nautical mile For other nautical miles see the full list.	१.० nmi (१.९ किमी; १.२ मैल)
	parsec	pc		pc		१.० pc (३.३ ly)
	light-year	ly		ly		१.० ly (६३,००० AU)
	astronomical unit	AU		AU		१.० AU (१५,००,००,००० किमी; ९,३०,००,००० मैल)
क्षेत्रफळ (संपूर्ण यादी)
पद्धत	एकक	कोड(इं.) (पर्यायी)	लघुरूप	नोंदी	रुपांतरण- मी२	एकत्रिकरण
एस आय	चौरस किमी	km2	चौ. किमी	US spelling: square kilometer	१०,००,०००	km2 sqmi m2 sqft cm2 sqin mm2 sqin
गैर-एसआय मेट्रिक
शाही व युएस नेहमीची	चौरस मैल	sqmi	चौ. मैल		२५,८९,९८८.११०३३६	sqmi km2
	square yard	sqyd	sq yd		०.८३६१२७३६	sqft m2 (sqfoot m2) sqin cm2
इतर
	VOLUME (Full list)
system	unit	unit- code	abbrev- iation	notes	conversion factor/m3	combinations
SI
	non-SI metric l impgal l USgal l U.S.gal l USdrygal l U.S.drygal L impgal L USgal L U.S.gal L USdrygal L U.S.drygal
		मिलीलीटर	ml	ml	इंग्लिश: milliliter one cubic centimetre	०.०००००१	ml impoz ml USoz ml U.S.oz mL impoz mL USoz mL U.S.oz
			Imperial & US customary
Imperial impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal impoz USoz impoz U.S.oz impoz ml impoz mL
		US customary liquid measure USgal l USgal L USgal impgal USgal l USgal L USgal impgal USoz ml USoz mL USoz impoz U.S.oz ml U.S.oz mL U.S.oz impoz
			US customary dry measure USdrygal l USdrygal L USdrygal impgal U.S.drygal l U.S.drygal L U.S.drygal impgal
				गती (संपूर्ण यादी)
				पद्धत	एकक	कोड (इंग्रजी) (पर्याय)	लघुरूप	नोंदी	रुपांतरण अवयव/(मी/से)	एकत्रिकरण
	एस आय m/s ft/s (m/s foot/s)
	गैर-एस आय मेट्रिक km/h mph
शाही & युएस नेहमीची mph km/h ft/s m/s
	समुद्री एकके
Force (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/N	combinations
SI GN LT-f GN LTf GN L/T-f GN L/Tf GN ST-f GN STf GN S/T-f GN S/Tf MN LT-f MN LTf MN L/T-f MN L/Tf MN ST-f MN STf MN S/T-f MN S/Tf kN LT-f kN LTf kN L/T-f kN L/Tf kN ST-f kN STf kN S/T-f kN S/Tf N lb-f N lbf N oz-f N ozf mN oz-f mN ozf mN gr-f mN grf μN gr-f μN grf nN gr-f nN grf
	cgs
		Metric gravitational units
			Avoirdupois-based units LT-f ST-f LTf STf L/T-f S/T-f L/Tf S/Tf ST-f LT-f STf LTf S/T-f L/T-f S/Tf L/Tf
				Energy (Full list)
	system			unit	code (alternative)	abbreviation	notes	conversion factor/J	combinations
	SI
cgs
				Watt-hour multiples
					Electronvolt multiples
Calorie multiples
		pound/ounce-foot/ inch-hour-minute-second
						British thermal unit
							TNT-based units
					Other
तापमान (वेगळे पान; संपूर्ण यादी)
पद्धत	एकक	कोड (इंग्रजीत) (पर्यायी)	लघुरूप	नोंदी	रुपांतरण केल्व्हिन मध्ये	एकत्रिकरण
एस आय	kelvin	के	के	Triple combinations are also possible. See the full list.	[के]	K °C (K C) K °R (K R) K °F (K F)
	degree Celsius	°C (C)	°C		([°C]+273.15)	°C K (C K) °C °R (C R) °C °F (C F)
शाही & युएस नेहमीची	degree Rankine	°R (R)	°R		([°R]/1.8)	°R K (R K) °R °C (R C) °R °F (R F)
	degree Fahrenheit	°F (F)	°F		(([°F]+459.67)/1.8)	°F K (F K) °F °C (F C) °F °R (F R)
Mass (Full list)
system	unit	code (alternative)	abbreviation	notes	conversion factor/kg	combinations
SI	किलोग्रॅम	kg	कि.ग्रॅ.	Triple combinations are also possible. See the full list.	१	kg lb kg st
	ग्रॅ	g	ग्रॅ		०.००१	g oz mg gr
	non-SI metric t LT t ST MT LT MT ST
		Avoirdupois LT t LT MT LT ST ST t ST MT ST LT st kg st lb
पाउंड	lb		पाउंड	Triple combinations are also possible. See the full list.	०.४५३५९२३७	lb kg lb st
आउंस	oz		oz		०.०२८३४९५२३	oz g
Troy
other
Pressure
	unit	code	abbreviation		conversion factor/Pa
साचा:Convert/MPa‎ साचा:Convert/kPa‎ साचा:Convert/hPa‎ साचा:Convert/Pa‎ साचा:Convert/mPa‎ साचा:Convert/mbar‎ साचा:Convert/mb‎ साचा:Convert/dbar‎ साचा:Convert/bar‎ साचा:Convert/kBa‎ साचा:Convert/Ba‎ साचा:Convert/atm‎ साचा:Convert/Torr‎ साचा:Convert/mmHg‎ साचा:Convert/inHg‎ साचा:Convert/psi‎
	Torque
		unit	code		notes
		newton metre	N·m (N.m)		Use N·m or N.m to get the mid-dot.
			Nm
	Torque conversions can go to and from the following units. foot-poundal foot-pound force inch-pound force inch-ounce force Codes, abbreviations and conversion factors (but to N·m in this case) are the same as with the corresponding energy units as listed above.
	Fuel efficiency
		unit	code (alternative)		notes		combinations
		kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
		litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
		litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
		miles per imperial gallon	mpgimp				mpgimp mpgus
		miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
		imperial gallons per mile	impgal/mi				impgal/mi
		US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
	The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
Power
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lower case hp for horsepower, for example)
Population density
	unit	code (alternative)		notes		combinations
	inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
	per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
	inhabitants per hectare	PD/ha				PD/ha PD/acre
	per hectare	/ha				/ha /acre
	inhabitants per square mile	PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
	per square mile	/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
	inhabitants per acre	PD/acre				PD/acre PD/ha
	per acre	/acre				/acre /ha

'per' units: kg/hl

When using a slash (/), a unit like kg/hl is recognized as kilograms per hectolitre and will be converted with other mass/volume units.

• {{convert|1000|kg/hl}} → रुपांतरण त्रूटी: "kg/hl" एकक अनोळखी आहे

Units of difference

When a number is the measurement for a difference, one conversion is done. This may occur in temperatures (°C, °F, K). Compare this to a range, when two conversions are done.

The only available units of difference are: |C-change=, |F-change= and |K-change=.

• {{convert|10|C}} → १० °से (५० °फॅ), regular temperature
• {{convert|10|C-change}} → १० °C (१८ °F), difference (e.g., "The temperature changed from 30 into 40 °C")
• {{convert|10-15|C}} → रुपांतरण त्रूटी: मूल्य "10-15" अंकातच आवश्यक आहे, range (e.g., "The temperature is between 10 and 15 °C")

Consistently, into multiple units:

• A rise of {{convert|10|C-change|F-change K-change}} → A rise of रुपांतरण त्रूटी: "F-change K-change" एकक अनोळखी आहे

Multiple units: 1 ft 5 in

In input

Base document साचा:Convert/doc § Notes lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

• {{convert|1|yd|2|ft|3|in}} → १ यार्ड २ फूट ३ इंच (१.६० मी)
• {{convert|2|ft|3|in|cm}} → २ फूट ३ इंच (६९ सेंमी)
• {{convert|1|lb|5|oz|g}} → १ पौंड ५ औंस (६०० ग्रॅम)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at साचा:Convert/doc § Notes.

• {{convert|2|m|ftin}} → २ मीटर (६ फूट ७ इंच)
• {{convert|2|m|ft in}} → रुपांतरण त्रूटी: "ft in" एकक अनोळखी आहे, using a space, returns the decimal point

Default behaviour, for comparison:

• {{convert|2|m}} → २ मीटर (६ फूट ७ इंच)

See also:

• {{hands}} a length used to measure horses
• {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi, €/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{convert|10|$/mi|$/km}} → रुपांतरण त्रूटी: "$/mi" एकक अनोळखी आहे

You can set the currency in both values using |$=€:

• {{convert|10|$/mi|$/km|$=€}} → रुपांतरण त्रूटी: "$/mi" एकक अनोळखी आहे

It is not possible to convert the currency. So, this result (mixed currencies) is not possible: साचा:!mxt N

Parameter list

Parameter options for {{convert}}
प्राचल	किंमत	वर्णन	नोंदी
|abbr=in	in	Use symbol for first (left-hand side) unit	Symbol ('abbreviation')
|abbr=off	off	Use name for all units	Symbol ('abbreviation')
|abbr=none	none
|abbr=on	on	Use symbol for all units	Symbol ('abbreviation')
|abbr=out	out	Use symbol for right-hand side unit (default)	Symbol ('abbreviation')
|abbr=values	values	Show only input and output numbers, not units	Parts only
|abbr=~	~	Shows both unit name and symbol	Symbol & name
|adj=j	j	Join number and unit name using " " instead of a space	Join values
|adj=mid|…	mid	User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.	Word adding, adjective
|adj=on	on	Unit name is adjective (singular and hyphenated)	Grammar, adjective
|adj=pre|…	pre	User-specified text before input unit. Expects 1 unnamed parameter.	Word adding
|adj=ri0	ri0	Round input with precision 0	Rounding and significant figures
|adj=ri1	ri1	Round input with precision 1	Rounding and significant figures
|adj=ri2	ri2	Round input with precision 2	Rounding and significant figures
|adj=ri3	ri3	Round input with precision 3	Rounding and significant figures
|disp=b	b	Join input and output using " (...)" (default)	Join values
|disp=sqbr	sqbr	Join input and output using " [...]"	Join values
|disp=br	br	Join input and output using "<br/>"	Join values
|disp=comma	comma	Join input and output using ", "	Join values
|disp=or	or	Join input and output using " or "	Join values
|disp=number	number	Display output number only	Parts only
|disp=output number only	output number only
|disp=out	out	Display only output number and name/symbol	Parts only
|disp=output only	output only
|disp=preunit|…[|…]	preunit	Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.	Word adding
|disp=table	table	Output is suitable for a table cell with align="right"	Table columns
|disp=tablecen	tablecen	Output is suitable for a table cell with align="center"	Table columns
|disp=unit	unit	Display input name/symbol only (not input number, not output)	Parts only
|disp=unit2	unit2	Display output name/symbol only (not input; not output number)	Parts only
|disp=x|...	x	Join input and output using user-specified text	Word adding
|comma=5	05	Only use comma for thousands separator if 5 or more digits	Number format
|comma=gaps	gaps	Use gaps (space), not comma, for thousands separator	Number format
|comma=gaps5	gaps5	Use gaps (space), but only if 5 or more digits	Number format
|comma=off	off	No thousands separator	Number format
|frac=N	N	Show imperial number in fractions, denominator=N	Number format, fraction
|lk=in	in	Link left-hand side unit name or symbol	Unit link
|lk=on	on	Link all unit names or symbols (but not twice for the same unit)	Unit link
|lk=out	out	Link right-hand side unit name or symbol	Unit link
|order=flip	flip	Inverts order of input, output measurements (conversion first)	Order
|round=5	05	Rounds calculation to the nearest multiple of 5	Rounding and significant figures
|round=25	25	Rounds calculation to the nearest multiple of 25	Rounding and significant figures
|round=each	each	In a range, each number is rounded by the default rounding	Rounding and significant figures
|sigfig=N	N	Round output number to N significant figures (N is a positive integer)	Rounding and significant figures
|sortable=in	in	Output numeric hidden sort field for use in a sortable table (based on input)	Table sort
|sortable=on	on
|sortable=out	out	Output numeric hidden sort field for use in a sortable table (based on output)	Table sort
|sp=us	us	Use U.S. spelling (like "meter" instead of default "metre")	Spelling U.S. names
|spell=in	in	Spell input number in words	Spelling numbers
|spell=In	In	Spell input number in words with first letter uppercase	Spelling numbers
|spell=on	on	Spell input and output numbers in words	Spelling numbers
|spell=On	On	Spell input and output numbers in words with first letter uppercase	Spelling numbers
|$=€	$	Replace $-sign with a currency sign, for example in $/acre (no currency conversion happens)	Cost per unit
|debug=yes	yes	Debugging only. In a sortable table: show the normally hidden sort key	Table sort
|abbr=comma	comma	Deprecated. Use |comma=off	Number format
|abbr=mos	mos	Deprecated. Use |x| or |by|	Range format
|adj=1	01	Deprecated. Do not use. No need to deviate from regarding plurals	Plural or singular
|adj=flip	flip	Deprecated. Use |order=flip	Order
|adj=nocomma	nocomma	Deprecated. Use |comma=off	Number format
|disp=2	02	Deprecated. Use |disp=output only	Parts only
|disp=5	05	Deprecated. Use |round=5	Rounding and significant figures
|disp=flip	flip	Deprecated. Use |order=flip	Order
|disp=flip5	flip5	Deprecated. Use |order=flip |round=5	Order, rounding
|disp=nocomma	nocomma	Deprecated. Use |comma=off	Number format
|disp=u2	u2	Deprecated. Use |disp=unit2	Parts only
|near=5	05	Deprecated. Use |round=5	Rounding and significant figures

Deprecated options

TemplateData

यथादृश्यसंपादक व इतर साधनांसाठी वापरण्यात येणारे हे टेम्प्लेटडाटा दस्तावेजीकरण आहे.

Convert साठी टेम्प्लेटडाटा

Converts measurements to other units.

साच्याचे प्राचल (पॅरामिटर्स)

प्राचल		वर्णन	प्रकार	स्थिती
value	1	the value to convert	आकडा	ऐच्छिक
from unit	2		ओळ	ऐच्छिक
to units	3	the unit to convert into	ओळ	ऐच्छिक
precision or suffix	4	significant digits after decimal dot or, if negative, exponent of ten	आकडा	ऐच्छिक
link units	lk	“on” all, “in” input, “out” output or “off” no units अविचल off	ओळ	ऐच्छिक
abbreviation	abbr	display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “values” no units at all अविचल out	ओळ	ऐच्छिक
spelling	sp	“us” display U.S. spelling of unit names	ओळ	ऐच्छिक
adjective	adj	adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end	ओळ	ऐच्छिक
conversion	disp	display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision अविचल b	ओळ	ऐच्छिक
ordering	order	“flip” returns converted value first, input value second.	ओळ	ऐच्छिक
significant figures	sigfig	number that sets the number of significant figures	आकडा	ऐच्छिक
rounding output	round	“5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range	ओळ	ऐच्छिक
thousands separator	comma	Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more) अविचल on	ओळ	ऐच्छिक
sort key	sortable	“on” generates a hidden sort key	ओळ	ऐच्छिक

See also

• साचा:Temp
• साचा:Temp